Knowledge - Hard disk format recovery
Position: Home > Hard disk format recovery > 3 Ways to Fix The Request Failed Due to A fatal Device Hardware Error

Top 10 Articles:
New Knowledge:
Classification:

3 Ways to Fix The Request Failed Due to A fatal Device Hardware Error


Summary: Today we will guide you 7 fastest solutions to fix the last USB device malfunctioned and Windows does not recognize it error happened on the computer while you were trying to connect the USB device.

Bitwar Data Recovery for Windows downloadBitwar Data Recovery for Mac download

When you trying to connect the USB device with the computer and willing to find some important documents you stored on the USB device, suddenly the Windows informs an error message: USB device not recognized, the last USB device you connected to this computer malfunctioned, and Windows does not recognize it.

7 Fastest Solutions to Fix the Last USB Device Malfunctioned Error

We found that many users had such errors no matter on Windows 7/8/10 when they tried to connect the USB device with the computer, which means,  USB does not show up on the computer and you cannot access the USB device at this moment.

Although this problem is quite the head-scratcher, but it doesn't means we cannot fix it. The following are 7 fastest solutions that any Windows user can give a shot and try to get rid of the last USB device malfunctioned problems.

7 Fastest Solutions to Fix the Last USB Device Malfunctioned Error

Solution 1. Remove and then plug the power supply to fix the last USB device malfunctioned error

Unplug the USB device from the Computer >> Turn off the computer >> Remove the power supply of the computer >> Plug the power supply back to the computer after 20-30 seconds >> Restart the computer >> Plug on the USB device again

Solution 2. Unplug the USB device and reconnect with computer to fix the last USB device malfunctioned error

Unplug the USB device from the computer >> clean the USB port of the device clamp the position of the USB port and flash chip inside the USB housing >> Reconnect the USB device with computer

Solution 3. Configure the USB Root Hub to fix the last USB device malfunctioned error

Press WIN+X and then choose Device Manager >> Find the Universal Serial Bus controllers >> Right click on USB Root Hub >> Properties >> Power Management >> Check Allow this computer to turn off this device to save power >> Click Ok >> Plug the USB device again with the computer.

Solution 4. Disable and then enable the Generic USB hub to fix the last USB device malfunctioned error

Press WIN+X and then choose Device Manager >> Find the Universal Serial Bus controllers >> Right click on Generic USB hub >> Disable >> After that then click Enable >> Click Ok >> Plug the USB device again with the computer.

Solution 5. Update the USB device driver to fix the last USB device malfunctioned error

Press WIN+X and then choose Device Manager >> Find the Universal Serial Bus controllers >> Right click on the USB device's driver >> Update Driver Software >> After update >> Click Ok >> Plug the USB device again with the computer.

Solution 6. Uninstall the universal serial Bus controller then reinstall to fix the last USB device malfunctioned error

Press WIN+X and then choose Device Manager >> Find the Universal Serial Bus controllers >> Right click on the USB device's driver >> Uninstall >> Reboot the computer>> Plug the USB device again with the computer >> The system will reinstall the driver for you and then fix the last USB device malfunctioned error

Solution 7. Disable USB selective suspend to fix the last USB device malfunctioned error

Press WIN+X and then choose Power Option >> Change Plan setting >> Change advanced power setting >> USB settings >> USB selective suspend setting >> Disable On battery and Plugged in >> Save the settings >> Plug the USB device again with the computer

How to recover data from USB device that has the last USB device malfunctioned error

We've shown you the 7 fastest solutions to fix the last USB device malfunctioned errors, each one has been proved that is the effective method to fix the error, however, if the solutions didn't worked to help you, you'll need the third-party free data recovery software to retrieve data for you on the USB device.

Here we recommend you the Bitwar Data Recovery Software, which is the best free data recovery tool that supports you to recover all types of files stored on the USB device, hard drive, external hard drive, etc.

You can click below download button to free get the software and then install it on the computer, launch the software when it's ready. Then follow below steps to recover data on USB device.

Bitwar Data Recovery for Windows downloadBitwar Data Recovery for Mac download

Step 1. Select the USB device and then click Next.
Step 2. Choose all types of files and then click Scan.
Step 3. Double click the file and then hit Recover button if necessary.

How to decrypt a file without password/key?

In conclusion

The last USB device malfunctioned error isn't mean the end of the word, try to fix this error with the above mentioned solutions, otherwise, you'll need the free data recovery software to help you recovering the data on USB device.
 


This article is original, reproduce the article should indicate the source URL:
http://admin.web.bitwar.nethttps://www.bitwar.net/course/format/1316.html
Keywords:The Request Failed Due to A fa