Knowledge - Hard disk format recovery
Position: Home > Hard disk format recovery > How to Format Disk and Where are The Formatted Disk Data Gone?

Top 10 Articles:
New Knowledge:
Classification:

How to Format Disk and Where are The Formatted Disk Data Gone?


Summary:

This article introduces how to format disk and where are the formatted disk data gone?
 
To format a hard drive means to delete any information on the drive and to set up a file system so your operating system can read data from, and write data to the drive. As complicated as that might sound, it is Very common for windows users. The time it takes to format a hard drive in Windows depends almost entirely on the drive's size, but your computer's overall speed plays a part, too.
 
Important: If the hard drive you want to format has never been used, or was just wiped clean, it must first be partitioned.
 
Any existing files on the drive would be erased with disk formatting. Disk formatting is usually done before initial installation or before installation of a new operating system. If the disk needs to be formatted, usually you’ll face the following things:
 
1. Incompatible file system error
2. To clean install Windows OS on a hard drive
3. Hard drive corrupted, developed bad sectors, access denied due to RAW file system
4. If there is a requirement for additional storage in the computer
 
Disk formatting can be performed on both magnetic platter hard drives and solid-state drives. The formatting comprises low-level formatting and high-level formatting. Low-level formatting aids in preparing the physical structure on the storage media. High-level formatting helps in creating the file system format within the logical volume or within the disk partition. Both formatting solutions will erase hard drive data completely, so make sure that you have backed up all important data.
 

How to Format Hard Drive from Command Prompt?


To format a hard drive using cmd via Command Prompt, use the diskpart commands given below carefully. Try your best to avoid mistakes.
 
Step 1. In your Windows, type cmd in the search box, you can get the best match called Command Prompt. Right-click on it and choose Run as administrator.
 
Step 2. On the Command Prompt black window, type diskpart and press enter.
 
Step 3. Now type list disk and press enter. All the disk drives will be listed, including your external drives that connected to the computer.
 
Step 4. Refer to the list disk information, type select disk + disk number, for example, select disk 1 and press enter. You're telling diskpart to format disk 1.
 
Step 5. Go on to type clean. This step starts to clean up all files and folders on the selected hard disk.
 
Step 6. Type create partition primary and press enter.
 
Step 7. After diskpart successfully created the specified partition, type format fs=ntfs (or format fs=exfat) and press enter. You're telling diskpart to format the drive with a file system, let it be NTFS, exFAT, etc.
 
Step 8. At last, assign a drive letter to the newly created partition by typing assign.
 
That's a complete guide of formatting hard disk with diskpart format commands.
 

How to Format a Hard Drive in Disk Management

 
1.      Open Disk Management, locate the drive you want to format from the list at the top.
2.      Once located, right-click or tap-and-hold on the drive and choose Format.... A "Format [drive letter]:" window should appear.
 
Note: If you're formatting a new drive, the drive letter assigned should be unfamiliar to you and the File System will probably be listed as RAW.
 
●     For the Volume label: Textbox, either give a name to the drive or leave the name as is. If this is a new drive, Windows will assign the volume label New Volume. However, I recommend giving a name to the drive so it's easier to identify in the future.
●     For File system: Choose NTFS, NTFS is always the best file system option to use in Windows unless you have a specific need to choose FAT32. Other FAT file systems are only available as options on drives 2 GB and smaller.
●     Set the Allocation unit size: To Default unless there's a specific need to customize it. There are very few reasons to change this.
●     The Perform a quick format option is checked by default. a quick format will format the hard drive considerably faster than a standard format, So you don't have to modify it.
●     The Enable file and folder compression option is unchecked by default. most drives are so large today that the tradeoff between the saved space and lower drive performance probably aren't worth it.so I recommend keeping it that way.
 
 
3.      Tap or click OK at the bottom of the window.
 
4.      Tap or click OK to the "Formatting this volume will erase all data on it. Back up any data you want to to keep before formatting. Do you want to continue?" message.
5.      The hard drive format will begin. You can keep track of the drive format by watching the Formatting: xx% progress in the Status field.
 
6.      The format is complete when the Status changes to Healthy.
 
Whether from the command line or from Disk Management, you can successfully format your disk. You can choose one as you like.
 
Before the article, we said formatting solutions will erase the disk data completely, so when your data lost in formatting operation, you should recover it from the formatted disk in a timely manner.
 

How to recover formatted disk data?


We recommend that you choose Bitwar Data Recovery which is the best data recovery software. You can recover data from formatted hard drive, memory card, USB flash drive, digital camera, camcorders, and so on.
 
Free download Bitwar Data Recovery on its official website and install it to your computer. Please don’t save any file or program to the formatted disk which you want to recover data from.

 Bitwar Data Recovery for Windows download Bitwar Data Recovery for Mac download

How to recover lost data from the disk


Step 1. Select the disk which have been formatted and you want to recover data from, then click “Next”.

 
Step 2. Select the “Formatted Recovery” mode then click “Next”, if files are not override by new data, files can be fully recovered.
 
However, if files are not found with Formatted Recovery, try “Deep Scan”. The deep scan can find all the files with a detailed scanning algorithm, but will not display the file names and may take longer time.
 
 
Step 3. Choose the exact types of files you want to recover, you can select all types if you have no idea about what type of file you want to recover.

Step 4. After scan, filter the file you want then preview them, the program allows you to preview before recover them to make a selection. It’s a powerful preview function that helps you to check the file by playing videos, audios or GIF images, Documents, etc.
 
Then choose the data you want and click "Recover" button to restore them back. Here, you'd better save all the recovered files to a different disk or external device in case of data recovery failure.
 
So that's all we want to share in this article. After this, your USB flash drive has working properly and your data on the USB flash drive has been back.
 
Now you know how to format the disk and if the data lost from formatted disk how to recover it, why not to try?

 Bitwar Data Recovery for Windows download Bitwar Data Recovery for Mac download
 


This article is original, reproduce the article should indicate the source URL:
http://admin.web.bitwar.nethttps://www.bitwar.net/course/format/1402.html
Keywords:format disk