Knowledge - Hard disk format recovery
Position: Home > Hard disk format recovery > How to Fix “windows can’t format flash drive” error

Top 10 Articles:
New Knowledge:
Classification:

How to Fix “windows can’t format flash drive” error


Summary:
 
If USB flash drive cannot be formatted and was informed with a prompt "Window was unable to complete the format" error. These errors indicate that windows can’t format flash drive and the USB flash drive are inaccessible. Just follow and find solutions here to get your problems solved right now.
can't format usb drive
 
USB drives can be connected to computer easily via USB drive to backup or transfer data. Sometimes, when you want to format it, you may be unable to format your flash drive. For example, it popped up an error saying "Windows was unable to complete the format". Why is this happening?
 

The Main Cause that Windows can't Format USB Drive

 
This error may happen as a result of following reasons:
 
Cause 1: Virus infection
 
If you plug USB flash drives into public computer, you’ll take the risk on damaging the files and even the drive will stop working due to Virus attacks.
 
Cause 2: USB flash device has bad sectors
 
As we all known, storage devices consists of sectors, Bad sector means the sector is damaged and can't be read or written, thus bad sectors can disrupt the formatting operation as well as file recovery. There are quite few causes of bad sectors, like bad quality, excessive defragmentation, unplug USB flash drive directly while it is working, etc.
 
Cause 3: USB flash drive suffers physical damage
 
Physical damage is another reason that makes storage device inaccessible. Computer won't be able to format the device if it can't use the device.
 
Cause 4: USB flash Disk is write-protected
 
Windows can't format a drive when it is in write-protected state. As formatting is kind of writing operation, so you need to remove the write-protection before formatting it.
 

How to fix windows can’t format flash drive?

 
If you are having a similar problem for unable to format or can't complete the format process on your hard drive partition, external hard drive, USB flash drive, SD card or other devices, don't worry. Here in the below, we'll show you two effective methods to fix devices format.
 
Note:  if the flash drive or devices gets badly physical damage, these solutions won’t help you.

Important: You should make sure that important data and files of the drive to be formatted have been backed up, as files will be erased once the drive is formatted. If your flash drive is inaccessible before you backing up the data, then you need to perform file recovery first prior to formatting. 


Fix Windows can’t format flash drive

 

Solution 1: Format via Disk Management

 
Disk Management is provided by Windows and it helps to manage partitions and disks for computer. Disk Management is able to create new volume, extend or shrink partition, change drive letter, delete or format partition, etc. the error flash drives can be repaired with Disk Management tool. Following the steps below, you can make USB formatting procedure performed successfully.
 
Step 1
Open Disk Management. Right click on My Computer and select item "Manage", and then click Disk Management on the left side. In the center section, you can see local hard drive and partitions and the USB drive which can be recognized by capacity.
can't format usb drive

Step 2
Right click the flash drive and select "Format" option and select file system format to perform quick format.
can't format usb drive
 
Step 3
Right click on the USB flash drive and select "New Simple Volume" item. You'll get the New Simple Volume Wizard which guides you recreate new partition for the flash drive. Operations are following the onscreen instructions, setting options and click "Next" button. When the process is done, you'll find the USB drive has been formatted and is properly recognized by system.
can't format flash drive
 

Solution 2: Format with Command Prompt

 
Disk Management is not almighty and it is not helpful in many cases. Thus, we need to switch to command line based formatting solution.
 
Step 1
For Windows 7 users click Start button and type cmd in the search both and press Enter. If UAC is enabled, you need to find Command Prompt from start menu and run it as administrator.
 
Step 2
Type command diskpart on the black window and press Enter key. Then you can see partition and disk list of current computer. All drives are listed with numbers and Disk 4 is the flash drive in question.
 can't format flash drive

Step 3
Continue typing disk 4 which is the problem drive and clean and press Enter. The drive will be scanned and its damaged file structure will be erased during scanning. Once the process is done, it reports confirmation message telling that it has successfully cleaned the drive, and new partition need to be created.
 
Step 4
Type create primary partition and hit Enter; next type in Command prompt format /FS:FAT32 J: (you can copy and paste it.) and press Enter. Here J is the drive letter of the USB drive, and you can change it in line with specific cases. The drive will be formatted to FAT file system and the formatting is very fast.
 

The need to recover data in a timely manner

 
Since the USB flash drive cannot be accessed or formatted, you need to perform file recovery as soon as possible. Otherwise, it will be overwritten with new data.
 
To recover lost data from the USB drive cannot be accessed or formatted, you should try Bitwar Data Recovery software. It is completely free to download which works well for all file types,including audios, videos, pictures, archives, emails, and documents etc. It can help you easily recover deleted data from the emptied Recycle Bin, digital cameras, memory cards, CF cards, SD cards, USB flash drives and external hard drives, etc. the program can be applied in various data loss situations. For example, system crash, hard drive formatting, virus attack, partition loss and other unknown reasons in Windows.
 
Now you can free download Bitwar Data Recovery here and install it to your computer. Then make sure that your USB drive is connected to this computer very well.

 Bitwar Data Recovery for Windows download Bitwar Data Recovery for Mac download

How to recover lost data from the disk


Step 1. Select the disk where you want to recover lost data from, then click “Next”.
can't format flash drive
Step 2. You can select the “Quick Scan” or “Formatted Recovery” mode due to how data is lost, then click “Next”, if files are not override by new data, files can be fully recovered.
 
However, if files are not found with previous scan, try “Deep Scan”. The deep scan can find all the files with a detailed scanning algorithm, but will not display the file names and may take longer time.
 Window was unable to complete the format

Step 3. Choose the exact types of files you want to recover, you can select all types if you have no idea about what type of file you want to recover.
Window was unable to complete the format

Step 4. After scan, filter the file you want then preview them, the program supports preview the common types of files by double-clicking. It’s a powerful preview function that helps you to check the file by playing videos, audios or GIF images, Documents, etc.
 
Then choose the data you want and click "Recover" button to restore them back. Here, you'd better save all the recovered files on a different drive or device in case of data recovery failure.
Window was unable to complete the format
 
So that's all we want to share in this article. After this, your USB flash drive has working properly and your data on the USB flash drive has been back.
 



This article is original, reproduce the article should indicate the source URL:
http://admin.web.bitwar.nethttps://www.bitwar.net/course/format/1382.html
Keywords:windows can’t format flash dri